Products
Boarded Floors
Quality and distinction for your projects.
Solid wood
Renewable and ecological resource
Excellent drying quality
Very good finish
Perfect embedding on four sides
Very good reaction to dyeing and polishing
Exclusive HCP process that uniforms color and provides greater stability
Floors made of solid wood from ecological renewable Eucalyptus Grandis cultivation forests.
Boards of varied lengths, in line with the latest American decoration trends, provide quality and comfort to any type of room.
Their finish quality, subject to the most stringent international standards, ensure long-lasting floors. Perfect embedding of the sides provides excellent finish and stability.
Besides the traditional polish and plastic film coating at the construction site of the Unifinished line, this product offers the possibility to be installed with Prefinished finish, which allows the floor to be used immediately after installation.
The Unifinished line offers three natural colors, Red, Light Red and Country, and each board is thoroughly sorted.
The Prefinished line comprises a range of three natural colors, Light Red, Red and Country, and three dyes, Tobacco, Terra and Timeless, to adapt to different decoration styles.
Decks
Natural and resistant
The Grandis deck is a widely accepted solution for outdoor areas, as it provides the warmth and texture of wood, in addition to offering convenience and comfort for outdoor use and verandas.
These remarkable advantages turn it into a lead product.
Especially designed for outdoor use, it provides long useful life with little maintenance work.Excellent finish that allows quick and efficient installation, without the need of sandpapering.The process uses natural, renewable and ecological resources with no soil damage. Very good reaction to polishing and dying, which allows easy product maintenance. Its color and veins are unique, offering a particularly attractive look.
How supplied:
Premium: Entirely free from knots and defects on its main side. Excellent look.
Country: Very attractive product, with some minimal knots and defects that do not affect its structural resistance
Phenolic Plywood
A wide range of Panels for industry.
Renewable and ecological resource
High bending, impact and scaling resistance.
Longer duration.
Resistant to outdoor use. Greater resistance, longer life and better use.
Plywood panel manufactured from thin semi-hard wood plates arranged transversally to the fiber.
The phenolic adhesive used is particularly formulated to support tough environmental conditions in terms of humidity and outdoor use, thus making GRANDIS highly resistant to scaling, and ensuring longer life. As it is a natural product, the outside surfaces, front and reverse, may have a different appearance.
Grandis wood plates entirely from cultivation forests are selected on the basis of their size, which is much larger than conventional panels.
Electronic squaring, calibration and sandpapering ensure the dimensional consistency of each panel, thus allowing a rapid and efficient modular use.
This plywood has been structurally developed in compliance with the most stringent international and local standards in terms of resistance to bending and scaling. These remarkable advantages turn it into a lead product.
Due to its high structural resistance, this product is the most suitable one when structural load needs and a good-looking finish are at stake.
Low maintenance product, highly resistant to the passing of time.
It is a multiple use product due to its particular appearance, light colors, easy handling and structural resistance.
Supplied as per IRAM 9506 and 9703 standards.
Quality III: Suitable to be painted and/or coated. Quality planking. Weather-resisting constructions. Used in rustic coating, shelves and other types of coating.
Quality IV: Suitable for structural outdoor use. Fit to be painted. Used in rustic coating, shelves and planking. Weather-resisting constructions.
Film coated Phenolic Plywood
MDO – Special for non-coated concrete.
Wet resistant; consequently, it lasts much longer.
Renewable and ecological resource. Fitted with plastic film and lateral seal.
Greater structural resistance to bending, impact and scaling.
Higher number of repetitive uses.
Greater resistance, longer duration, better use.
The use of long-lasting plastic film and lateral seal in Grandis plywood panels increases wet resistance and makes form-stripping easier, thus allowing a higher number of repetitive uses in framing floors, partitions, columns and reinforced concrete beams.
The surface, coated with paper impregnated with 370 g/m2 resin, allows a level of reuses higher than that of traditional plastic film coatings in the Argentine market. The product has been structurally developed in compliance with the most stringent international and local standards regarding resistance to bending and scaling.
These remarkable advantages turn it into a lead product.
Due to its high structural resistance, this product is the most suitable one for planking and assemblies that require critical bending and structural load properties.
The possibility of repetitive uses turns it into a highly competitive product when compared to similar ones.
How supplied:
Film coat 370/IV: One side coated with film impregnated with 370 g/m3 resin, and reverse side coated with quality IV wooden plate.
Construction Wood
Green wood for structural use.
Construction wood is a product processed in our sawmill after being directly obtained from our forests. These are solid green wood products.
Unlike other types of wood, it does not need any preservatives, and provides the early stages of the construction work with a long-lasting product suitable for structural uses and requiring little maintenance.
Technology and Quality
All our products are manufactured in accordance with international standards under appropriate environmentally friendly handling conditions (i.e. sustainable, renewable, renowned and respected worldwide).
Product Characteristics – CONSTRUCTION WOOD
Boards: Flat pieces of considerable length and breadth compared with the thickness, whose main quality is elasticity along the piece. Frequently used in different applications in the construction industry.
Beams: Flat pieces thicker than one inch used at the start of the construction work.
Struts: Easy to handle square pieces with high bending and torsion resistance, used to support plankings.
Stake Drivers: Pieces used in roof structures.
Plaster laths: Thin solid wood pieces used as fixing elements.
Bolts: Specific laths used in roof structures to attach isolating elements to plaster laths.
Wall bases
The most attractive looking complement for your floors.
Renewable and ecological resource.
Very good resistance to polishing and dyeing.
Excellent finish in all rooms.
The Grandis wall base is a solid wood molded piece used as a finish strip or baseboard to decorate the lower end of walls or columns. It can also be used to cover wall-to-floor joints.
The natural and esthetic features of Grandis wood wall bases provide a touch of personality to the different rooms where they are used.
Technology and Quality
Developed to match the properties of wooden floors and replace wall bases made of other materials, this product features an excellent acceptance of dyes and polishes.
How supplied:
Premium: ClearPanel product whose surface contains repaired or plugged knots.
Tongue-and-groove board
Traditional warmth in construction.
Tongue-and-groove-board is a molded wooden piece whose sides have perfect embedding properties. It is mainly used in ceilings, floor structures and coatings. Grandis tongue-and-groove-board has consolidated as a generator of a wide range of quality and value-added products, using wood from cultivation forests, an ecological and renewable resource, thus protecting native forests.
Chosen by color and vein, the pieces harmonize with the context, transforming it into a unique lively place.
Our exclusive integral hygrometric control process makes it possible to achieve great stability and several decoration possibilities: roofs, coatings, floor structures and others.
How supplied:
Premium: Selection of homogeneous pieces to achieve uniformity in all rooms.
Country: Very attractive product, accepting some minimal knots and defects without affecting the product’s structural resistance.
Plakimbre
Record time installation
Speed and efficiency.
Color and veins of native hard woods.
Renewable and ecological resource.
Equivalent to 10 or 12 tongue-and-groove-boards per panel.
Reduces nailing damage by 80%.
Great resistance to polish and dyes.
More effective leak barrier.
More stable and resistant.
Immune to fungi and insects.
Plakimbre is a plywood panel manufactured with thin plates of Grandis wood. Its longitudinal grooves make it the perfect substitute for tongue-and-groove boards for covering flat and large surfaces.
As it is a thermal and sound barrier, it is particularly fit for roofs, coatings, floor structures, gates and fences.
Remarkable advantages that turn it into a lead product:
Reduced product installation cost.
Renewable and ecological resource, as it allows using natural resources without depleting the soil.
Cheaper installation cost on large surfaces.
Improved life quality, as it reduces sound pollution and energy consumption.
How supplied:
Premium: Panel fit to be painted. Panel surface with healthy knots of any diameter, sandpapered with 80 grit sandpaper.
Deco: Panel surface featuring repaired or plugged knots.
All rights reserved